集中料系統流程控制

集中料系統流程控制
集中料系統由運輸設施、粉碎設施--除濕干燥設施、混合設施、配量設施、倉儲規劃和流程控制——集中料系統流程控制它們是一個整體。 只有集中料系統流程控制安裝和運行之后，它們才能真正構成一個完成的流程方案：您的設備。 我們不會讓您獨自面對所有這些元素，而是陪伴您走過整過流程，直到開始運營以及員工培訓階段。 這就是我們對“伙伴關系”的理解。
提高集中料系統使用壽命方法
1、對集中料系統電機做好及時保護，如有發現電機不轉或停轉及時做好檢查修復。
2、對吸料斗和干燥桶清理完畢后，要安裝到位，集中供料系統過濾器要按時清理。
3、實行專人管理負責制和單機操作責任制，對集中供料系統的維護要建立維護保養檔案，對日常運行和維護保養進行記錄。
4、定期對集中供料系統中的單機進行保養維護，并定期對輸送管道，特別是真空管線和壓縮空氣線查漏。
5、定期給集中供料系統送料機使用潤滑油進行生產保養，每天都要做好對電源線的定期檢查，看是否有電源裸露，如有及時更換電源線。
6、確保集中供料系統送料機安放是否平穩牢固，有無松動歪斜現象，并做好送料機的機臺的清潔工作，這樣不僅能夠提高它的使用效率，還能延長其使用壽命。

關于集中料系統流程控制的正確使用方法就為大家介紹到這里了，做到以上幾點，不但能夠提高了供料設備的使用壽命，更重要的是集中料系統流程控制節省了電能及減少維護費用。

Centralized material system flow control
The centralized material system consists of transport facilities, crushing facilities - dehumidification drying facilities, mixing facilities, metering facilities, warehousing planning and process control - centralized material system processes to control them as a whole. Only after installation and operation, they can really form a complete process plan: your device. We will not let you face all these elements alone, but accompany you through the whole process until the start of the operation and staff training stage. This is our understanding of "partnership".
Improve the service life of the centralized material system
1, the centralized material system motor to do a timely protection, if found that the motor does not turn or stop in time to check and repair.
2, the suction hopper and drying bucket after cleaning, to be installed in place, centralized feeding system filter to be cleaned on time.
3, the implementation of personal responsibility management system and stand-alone responsibility system, the maintenance of centralized feeding system to establish maintenance files, the daily operation and maintenance records.
4, on a regular basis in the centralized feeding system for maintenance and maintenance, and regularly on the pipeline, especially the vacuum pipeline and compressed air line leak.
5, on a regular basis to the centralized feeding system feeders use lubricants for production and maintenance, every day to do a regular inspection of the power cord to see if there is power exposed, if the timely replacement of the power cord.
6, to ensure that the centralized feeding system feeding machine is stable and solid, with or without loose skew phenomenon, and do a good job feeding machine cleaning machine, so that not only can improve its efficiency, but also extend its service life.
On the centralized system of the correct use of process control methods to introduce here, and do the above, not only can improve the service life of the feeding equipment, more importantly, centralized system control system to save energy and reduce maintenance cost.